TP-LINK RE580D RANGE EXTENDER (AC1900)
TP-link RE580D Range extender offers the speed up to 600 Mbps +1300 Mbps on 5 GHz.It also has three dual-band external antennas and 700Mw high power amplifiers, and it quickly eliminates all dead zones in your home or office. You can use it with any router. Now the user can rapidly expand the wifi network because it also has the dual-core 1GHz processor. There is also beamforming technology, and it also gets focuses on the wifi transmission in the direction of your connected devices. The user can also get a fantastic online experience for wired devices. You can also connect the smart TVs, game consoles, Blu-ray players. It also comes in an intuitive, user-friendly design. You can now quickly do the installation, configuration, and positioning more accessible than ever. You can also access all your devices with a Tether app.
SETUP OF TP-LINK RE580D RANGE EXTENDER WITH WEB DOMAIN
- You can now unbox the box of TP-link RE580D Range extender.
- Now the user also attaches the antennas with the extender.
- Set the extender in the right direction.
- You can also check the internet signals.
- If the signals are not stable, then the user can try to stable it.
- Unplug the modem.
- The user also attaches the power adapter with the extender.
- Now the user also checks the power of the extender is working.
- In case it is not working, then the user also pushes the on/off button of the extender.
- Join the modem, computer, and the extender with the ethernet port.
- Open the web browser.
- You can also write www.tplinkrepeater.net or 192.168.0.254.
- Here the default username and the password as the admin.
- Select the country, time, and the language on set up wizards.
- Now scan the wifi.
- If scanning is incomplete, then you can enter the wifi.
- After this, the user uses the TP-link extender.
WPS SETUP OF TP-LINK RE580D RANGE EXTENDER
- Unwrap the pack of TP-link RE580D Range extender.
- Now the user also attaches the antennas with the extender.
- You can also set the extender near the router.
- Review your internet signals.
- If the signals are slow, then fix it.
- Join the power supply with the extender.
- Now the power light of the extender is also working.
- If any case is not working, then the user can also push the on/off button of the extender.
- You can also check the power of the router is working.
- Locate the WPS button on the extender and the router.
- Press the WPS button on the extender and the router.
- It also starts catching the settings.
- Now the lights even start flashing.
- If the lights do not blink, then the user also changes the position of the router.
- You can also use your TP-link extender.
TETHER APP SETUP OF TP-LINK RE580D RANGE EXTENDER
- Unpack the pack of TP-link RE580D Range extender.
- Here the user also attaches the antennas with the extender.
- Put the extender at the right location.
- You can also check the internet signals.
- If the signals are unstable, try to stable it.
- The user also joins the power supply to the extender.
- If the power light of the extender still not working, then the user also pushes the on/off button of the extender.
- Launch any play store.
- Search the Tether app in the play store.
- Download it.
- You can also install it.
- Open the app now.
- Type all the details of the extender.
- Check there is a QR code on the extender.
- Scan the QR code.
- It also starts catching the settings.
- You can now fast network with your extender.
LOG IN TO TP-LINK RE580D RANGE EXTENDER
- Launch the web browser.
- Here the user also write www.tplinkrepeater.net or the IP address is 192.168.0.254
- You can also use the default username and the password as the admin.
- Now you log into the settings.
FIRMWARE UPDATE OF TP-LINK RE580D RANGE EXTENDER WITH WEB DOMAIN
- Open the web browser.
- You can also write www.tplinkrepeater.net, or the IP address is 192.168.0.254.
- Here the user also uses the admin for the default username and the password.
- Go to the advanced settings.
- Check the firmware update.
- Tap on it.
- It takes only two seconds to upgrade the firmware.
- You can also use the latest firmware with bug fixes.
ACCESS POINT MODE IN TP-LINK RE580D RANGE EXTENDER
- Launch the web browser.
- You can also write www.tplinkrepeater.net or the IP address.
- Now the user also uses the username and the password as the admin.
- Tap on the advanced settings.
- Click on the wireless settings.
- Search the access point mode.
- Tap on it.
- Now enable the AP mode.
- Apply it.
- Save the settings.
- Now the user can not use some features of the extender.
- Your extender is in AP mode now.
CUSTOMIZE THE SETTINGS IN TP-LINK RE580D RANGE EXTENDER
- Launch the web browser.
- Here the user also writes www.tplinkrepeater.net or the IP address.
- You can also use the username and the password as the admin.
- Hit on the advanced settings.
- Tap on the wireless settings.
- You can now customize the settings.
- Apply it.
- Save it.
- You can now use customized settings.
FACTORY RESET OF TP-LINK RE580D RANGE EXTENDER
- Open the web browser.
- You can also write www.tplinkrepeater.net or the IP address.
- Now the user also uses the username and the password as the admin.
- Tap on the advanced settings.
- You can hit on factory reset.
- After two seconds, your extender is in default settings.
- Repeat the setup process for setting up the extender.
