TP-LINK AC1750 RANGE EXTENDER (RE450)
TP-link AC1750 range extender has three adjustable antennas. You can quickly expand the coverage area of your home or office. It asl offers the speeds up to 450Mbps on 2.4GHz +1300 Mbps on 5GHz.There is also gigabit ethernet cable, which acts as a wireless adapter so you can attach wired devices. You can also enjoy online games, listening to music, and much more fun is there. The user can also use the Intelligent smart signal light to locate the right place for the extender. It also comes with the next generation wifi technology, which works three times faster than the standard speed. Now the user can also get the same speed of the network in every corner of home or office. You can also freely use the extender because it is also encrypted. Here the user can also use the Tether app to organize all devices.
SETUP OF TP-LINK AC1750 RANGE EXTENDER WITH WEB DOMAIN
- Open the box of TP-link AC1750 Range extender.
- Now the user can also set the antennas on the extender.
- You can now place it in the right position.
- Here the user can also see the internet signals.
- Now the user also checks the speed of the internet.
- If it slows, then try to fix it.
- Unplug the modem.
- Here the user can also attach the power adapter with the extender.
- If the power of the extender is off, then the user can also press the power button.
- You can take the ethernet port and combine the laptop, modem, and the extender.
- Launch any web browser.
- Use www.tplinkrepeater.net or the IP address is 192.168.0.254
- The user now uses the username and the password as the admin.
- After this, the user can see there is a setup wizard on the screen.
- Select the country from the list.
- Now you also select the language and time.
- Scan the wifi.
- If the scanning does not complete, the user can also enter the wifi.
- Enjoy your new extender.
WPS SETUP OF TP-LINK AC1750 RANGE EXTENDER
- Unpack the pack of TP-link AC1750 Range extender.
- You can also connect the antennas with the extender.
- Now the user can also place at the right location.
- The user can also check the internet network speed.
- If the speed is slow, try to fix it.
- Attach the power charger with the extender.
- The power of the extender is not working; then, the user also pushes the extender’s power button.
- You can also check the router is working.
- Now there is a WPS button on both devices.
- Explore it.
- The user can also hold the WPS button on both devices.
- The led light is flashing now.
- It also starts catching the settings.
- Now your extender is ready for use.
TETHER APP SETUP OF TP-LINK AC1750 RANGE EXTENDER
- The user now unpacks the packet of the TP-link Range extender.
- Here the user can also adjust the antennas with extender.
- Place the extender in the right position.
- You can also review the internet signals.
- If the signals are unstable, then try to solve it.
- The user can also connect the power supply to the extender.
- In case the power of the extender is not working, then the user can also push the power button.
- Use your favorite device now.
- Open the play store.
- Here is the Tether app.
- Download and install it.
- Open the Tether app.
- Enter the details of the extender.
- Check the QR code on the extender.
- Scan the QR code now.
- It also starts catching the settings.
- Your extender is now ready.
LOG IN TO TP-LINK AC1750 RANGE EXTENDER
- Launch any web browser.
- Here the user can also use www.tplinkrepeater.net, or the IP address is 192.168.0.254.
- You can also apply the admin for username and the password.
- Now the user can also use the advanced settings.
CONFIGURE HIGH-SPEED MODE IN TP-LINK AC1750 RANGE EXTENDER
- Open any web browser.
- You can also write www.tplinkrepeater.net, or the IP address is 192.168.0.254.
- The user can also use the username and the password as the admin.
- Here the user can go to the wireless settings >connect to the network.
- Tap on the wireless scanner of 2.4 G network.
- You can now uncheck the 5GHz network and disable the 5GHz network to the router.
- Save all settings.
- Now your TP-link AC1750 Range extender connects to the main router in 2.4GHz network
- You can again go to the wireless settings >extended network.
- Now enable the Extended 5GHz and also disable Extended 2.4 GHz.
- Save all settings again.
- You can now quickly use high-speed mode in the extender.
FIRMWARE UPDATE OF TP-LINK AC1750 RANGE EXTENDER
- Open any web browser.
- Type the www.tplinkrepeater.net or the IP address.
- Use the username and the password as the admin.
- Tap on advanced settings.
- Hit on the wireless settings.
- You can now able to use the latest firmware with security patches.
FIRMWARE UPDATE OF TP-LINK AC1750 RANGE EXTENDER WITH TETHER APP
- Open the play store.
- Check theTether app.
- Download it.
- Open the app.
- Go to the settings.
- Click on the firmware update.
- Now you can also receive the alert for the latest release firmware.
- You now have the latest firmware of extender.
SOFT RESET OF TP-LINK AC1750 RANGE EXTENDER
- Launch the web browser.
- Now write www.tplinkrepeater.net
- Apply the admin for username and the password.
- Go to advanced settings.
- Check factory reset.
- You can also tap on it.
- Your extender is in default settings.
- Use any method and set up the extender again.
HARD RESET OF TP-LINK AC1750 RANGE EXTENDER
- Check the reset button on the extender.
- You can now hold the reset button with a paper clip.
- Led lights are blinking.
- Release the reset button.
- Lights are also stable.
- Now your extender is in default settings.
- The user again does the same process for setting up the extender.
