TP-LINK RE500 RANGE EXTENDER (AC1900)
TP-link RE500 range extender comes with four fixed antennas. It offers the speed of the AC1900 (600mBPS ON 2.4GHz + 1300Mbps on 5GHz.)You can also transfer all data to many devices with the MU-MIMO. You can also get the target wifi signals to each connected device. The user can also attach the many devices with the help of the Gigabit Ethernet port. Now the user can also locate the best location with the help of the Intelligent signal lights. It also comes with built-in access point mode. The user can only need to plug the ethernet cable into the ethernet port. Now you can use the extender as the access point mode. Here the user can also handle all devices smartly with the Tether app.
You can set up the TP-link RE500 Range Extender in three ways.
- WEB DOMAIN
- WIRELESS PROTECTED SETUP
- TETHER APP
SETUP OF THE TP-LINK RE500 RANGE EXTENDER WITH WWW.TPLINKREPEATER.NET
- Open the box of the TP-link RE500 range extender.
- The user can place it at the right location.
- You can also switch on the router.
- Check your internet connection.
- If the internet has not stable signals, then the user can fix it.
- The user can attach the power adapter with the extender.
- Turn on the extender.
- If the lights are on, then it means the user can set up the extender now.
- The user can also open the www.tplinkrepeater.net on any web browser or the IP address 192.168.0.254
- Here the user can also write username and the password.
- The username is also admin, and the password is also admin.
- Now the user can also enter the information of the language, region, and time.
- You can also scan the wifi.
- In case the scanning of the wifi fails, then you can enter manually.
- Here the user can also select the network name or SSID for 2.4GHz and 5GHz.
- You can also enter the router network name (SSID).
- Here the user can also name the extender network,
- Tap on Next.
- Save all settings.
- You are now connecting to the extender.
WI-FI PROTECTED SETUP OF THE TP-LINK RE500 RANGE EXTENDER
- The user can now open the pack of the TP-link RE500 range extender.
- You can now place the extender near the router.
- Attach the power supply.
- Turn on the extender.
- If the extender does not turn on, then you can press the power button of the extender.
- You can also use the same network for router and extender.
- Search the WPS button on the extender and the router.
- First, the user can press the WPS button on the extender then Led start blinking.
- In the two seconds, you can press the WPS button on the router.
- Now the Led lights of the extender come solidly; it means they are connected.
- In case the Led light is not stable, then the user can again repeat the same process.
TETHER APP SETUP OF TP-LINK RE500 RANGE EXTENDER
- You can download the TP-link Tether app from the play store of your mobile.
- First, the user can now unwrap the box of the TP-link RE500 range extender.
- Here you can also place the extender near the router.
- Connect the power supply with the extender.
- Now the power of the extender is on.
- If the power of the extender is not on then, the user can press the power button of the extender.
- Here the user can also use the same network for extender and on your mobile.
- Open the Tether app.
- Enter the information of the extender in the app.
- Scan the QR code of the extender.
- It starts taking the configuration of the settings.
- After this, the user can use the extender.
LOG INTO THE TP-LINK RE500 RANGE EXTENDER
- Open the web browser.
- Here you can write www.tplinkrepeater.net, or the IP address is 192.168.0.254.
- Now you can also use the username and the admin and the password as the admin.
- You can now also access the settings.
FIRMWARE UPDATE OF THE TP-LINK RE500 RANGE EXTENDER WITH WEB DOMAIN
- Open the web browser.
- Here you can also write www.tplinkrepeater.net or the IP address is 192.168.0.254
- The user can now use the username as the admin and the password as the admin.
- Hit on the advance settings.
- Here is the firmware update.
- Click on it.
- You can now wait for two seconds.
- Now the user has the updated firmware.
FIRMWARE UPDATE OF THE TP-LINK RE500 RANGE EXTENDER WITH TETHER APP
- Download the TP-link Tether app from the play store.
- Now the user can type the details of the extender.
- Here the user can now tap on the settings.
- Click on the firmware update.
- Now you can also get the message for the latest firmware.
- You now have the latest firmware.
FIRMWARE UPDATE OF THE TP-LINK RE500 RANGE EXTENDER MANUALLY
- You can connect the computer and the extender.
- Use the same network for both devices.
- Open the web browser.
- Here the user can go to the official website of the TP-link.
- The user sees the download center.
- Click on it.
- Now you can enter the name and the model of the extender.
- You can now search for the latest firmware.
- The last digits tell you about the date of the release.
- Now the user can download the latest firmware.
- Save in the file on the computer.
- Now you can enter www.tplinkrepeater.net on the web browser.
- Write the username as the admin and the password as the admin.
- Now the user can go to the system tool in the advance settings.
- Here the user can now click on upload the firmware.
- You can also not turn off your computer till the process not complete.
- The user now has the latest firmware.
RESET OF THE TP-LINK RE500 RANGE EXTENDER WITH WEB DOMAIN
- You can open the web browser.
- Here the user can now write www.tplinkrepeater.net or the IP address is 192.168.0.254
- You can use the username as the admin and the password as the admin.
- The user can now tap on the advanced settings.
- Hit on the factory reset.
- It takes two seconds for the reset process.
- The user has the extender in the default settings.
- You can repeat the setup process for the use of the extender.
HARD RESET OF THE TP-LINK RE500 RANGE EXTENDER
- The user can now search the reset button on the extender.
- Here the user can now push the reset button on the extender with the paper clip for two seconds.
- You can also see the lights are flashing.
- Release the reset button of the extender.
- Now the lights are stable.
- The user can now have the extender in the default settings.
- Here the user needs to repeat the same process of the setup.
